Every wheelbase in this database from every brand, sorted by published price from low to high. Makers quote torque on different bases, so the basis is printed beside each figure, and a holding number is not comparable to a peak one.
As an Amazon Associate we earn from qualifying purchases. We earn a commission when you buy through links on this page. It does not change what you pay, and it does not decide what we recommend. Every spec here is sourced and dated.
Field36models from 6 brands
With a price32 of 36on the manufacturer's own page
Price span$199.99 to $1,199.99from the Logitech G G29 up
Each mark is one model at its published price. Select a mark to jump to that model's specifications on this page.
This grid holds all wheelbases in the database, from every brand, sorted by published price from low to high. No opinion sets the order.
Prices and specs are read from each maker's own page, checked 2026-08-29 to 2026-09-13. Confirm the price before you buy. Torque is the turning force the motor puts through the wheel, in newton metres (Nm). Peak, holding, and continuous are three ways makers measure it, and there is no published conversion between them. Not published means the maker's own page states no figure. It does not mean the product lacks the feature.
Read the torque column carefully. These manufacturers do not all quote torque the same way. The basis is printed beside every figure, and a holding figure is not directly comparable to a peak one.
Peak torque, quoted in newton metres, is the maximum rotational force the base can apply to the wheel rim. Peak torque is the most the motor can produce. You set the level you drive at below it. Most drivers run well below the maximum, because sustained high force is tiring over a long stint and because the extra output is wasted if the rig moves.
The practical consequence is that a rigidly mounted 12 Nm base often delivers more usable detail than a 21 Nm base clamped to a desk that flexes. Budget for the frame when you budget for the base.
Direct drive, belt, and gear
A direct-drive base mounts the wheel straight onto the motor shaft, so there is nothing between the motor and your hands. That is what makes small details, like the front tyres losing grip, readable.
Belt and gear-driven wheels put a reduction stage in between. They cost less and they are quieter to live with, but the mechanism smooths over the fine detail and adds a small amount of slack at the centre.
Every option in detail
One section per product, in the same price order as the table above. Every figure is the manufacturer's own, with the source underneath.
Why do two wheelbases with the same Nm figure feel different?
Because the number is often measuring different things. Manufacturers do not quote torque on a single basis. Fanatec publishes holding torque and states peak overshoot separately, so its Podium DD reads 25 Nm holding with a 33 Nm peak. MOZA publishes peak torque. Thrustmaster publishes constant torque.
A holding figure and a peak figure are not interchangeable, and there is no published conversion between them. That is why every torque figure on this site carries the basis it was quoted on, and why we do not rank a holding number against a peak one.
Does a stronger wheelbase always feel better?
No. Peak torque is the most the motor can produce. You set the level you drive at below it. Most drivers run well below the maximum, because sustained high force is tiring over a long stint.
The bigger constraint is the frame. Any movement in the rig is force the base produced that you never feel, so a rigidly mounted mid-force base often gives more usable detail than a stronger base clamped to a desk that flexes. Budget for the frame when you budget for the base.
Will this work on my console?
Check the platform column, and treat a blank as unknown rather than as a no. We list only what the manufacturer states on its own product page.
The expensive trap is that console compatibility is often conditional. A base sold as console compatible may only be recognised when a specific licensed wheel rim is attached, and the base alone will not work. Confirm the exact combination with the manufacturer before ordering.
Will my wheel rim fit this base?
Only if they share a quick release standard. The coupling between base and rim is the most common cross-brand incompatibility in sim racing, and it constrains upgrades more than any other single spec.
Check the quick release field on both products before buying either.
Why do some products show no price?
Because the manufacturer does not publish one in a form we can attribute. Several render prices through scripts, show a different currency depending on where you are, or sell only through retailers.
We show Not published rather than a guess, and rather than a converted figure no source states. Prices also move constantly, so confirm on the manufacturer's page before buying. Every link here goes there.
How is this list ordered?
By published price, low to high. There is no editor's pick and no star rating, because we have not tested this hardware. The table is the review.
Every figure carries the manufacturer URL it came from and the date it was checked, so you can verify any row rather than take our word for it.
Sources
Every spec on this page was read from the manufacturer's own published documentation.